Introduction

We are proud to offer the world’s only handheld instruments that can measure both density and colour of printed matter for any illuminant even if the substrate contains fluorescent whitening agents (FWA): The Spectrodensitometers FD-7 and FD-5.

The Fluorescent Spectrodensitometers FD-7 and FD-5 are equipped with the newest technology of Konica Minolta: VFS (Virtual Fluorescence Standard). This technology enables colour evaluation taking into consideration the fluorescence of paper under any illuminant, including D50 (ISO 13655:2009 M1). The new VFS technology takes advantage of the optical, sensor and software technology cultivated through our long experience with colour-measuring instruments to enable measurements for a variety of illuminants while including the influence of fluorescence.

Specifications

Model FD-5
Illumination/viewing system 45°a:0°(annular illumination)*1 
Conforms to CIE No. 15, ISO 7724/1, DIN5033 Teil 7, ASTM E 1164, and JIS Z 8722 Condition A for reflectance measurements.
Spectral separation device Concave grating
Wavelength range Spectral reflectance 380 to 730 nm
Wavelength pitch 10 nm
Half bandwidth Approx. 10 nm
Measurement area Ø3.5mm
Light source LED
Measurement range Density: 0.0D to 2.5D; Reflectance: 0 to 150%
Short-term repeatability Density: σ0.01D 
Colorimetric: Within σΔE00 0.05 (When white plate is measured 30 times at 10-second intervals after white calibration has been performed)
Inter-instrument agreement Within ΔE00 0.3 (Average of 12 BCRA Series II color tiles compared to values measured with a master body under Konica Minolta standard conditions)
Measurement time Approx. 1.4 s (single-point reflectance measurement)
Measurement conditions Corresponding to ISO 13655 Measurement Conditions M0 (CIE Illuminant A), M1 (CIE Illuminant D50), M2 (illumination with UV-cut filter) and M3 (CIE Illuminant A with polarization filter); User-defined illuminant
Illuminants A, C, D50, ID50, D65, ID65, F2, F6, F7, F8, F9, F10, F11, F12, User-defined illuminant
Observers 2° Standard Observer, 10° Standard Observer
Colour spaces L*a*b*, L*C*h, Hunter Lab, Yxy, XYZ and colour-difference in these colour spaces
Colour-difference equations ΔE*ab (CIE 1976), ΔE*94 (CIE 1994), ΔE00 (CIE 2000), ΔE (Hunter), CMC (l:c)
Indexes WI (ASTM E313-96); Tint (ASTM E313-96); ISO Brightness (ISO 2470-1); D65 Brightness (ISO 2470-2); Delta Brightness (“Fluorescent Whitening Intensity”)
Density ISO Status T, ISO Status E, ISO Status A, ISO Status I; DIN16536; Spectral density for spotcolours
Advanced features Greybalance (densitometric & colorimetric), ISOCHECK (QC against ISO or own standards), TARGETMATCH
Data Memory Single data: Colorimetric target data: 30 data; Density target data: 30 data

50 color sets: 15 colorimetric target data per color set with 3 additional tone values each. ColorSets for standard printing conditions are already included.

Display language English, French, German, Spanish, Japanese, Chinese (simplified)
Interface USB 2.0
Output data*2 Colorimetric and densitometric values
Power Rechargeable internal lithium-ion battery (Number of measurements per charge: Approx. 2,000 when new); AC adapter; USB bus power
Dimensions (W × D × H) 70 × 165 × 83mm (Body only); 90 × 172 × 84mm (With target mask attached)
Operating temperature/humidity range 10 to 35°C, 30 to 85% relative humidity with no condensation
Storage temperature/humidity range 0 to 45°C, 0 to 85% relative humidity with no condensation

*1 Illumination for wavelengths under 400nm is unidirectional.

*2 Available when using PC software

  • The support and availability of the listed specifications and functionalities varies depending on operating systems, applications, network protocols as well as network and system configurations.
  • Some of the product illustrations contain optional accessories.
  • Specifications and accessories are based on the information available at the time of printing and are subject to change without notice.
  • Konica Minolta does not warrant that all specifications mentioned will be error-free.
  • Microsoft, Windows and the Windows logo are trademarks, or registered trademarks, of Microsoft Corporation in the United States and/or other countries.
  • All other brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.

Features

The FD-5 is the perfect tool to help printers in their daily business. The lightweight FD-5 makes process and quality control easier and more reliable.

TARGETMATCH including backing conversion helps printers to achieve the right colour on their production paper.

ISOCHECK enables fast quality control without additional software.

DeltaBrightness gives unambigous information about the amount of optical brightener and allows a fast control of production papers.

The Spectrophotometers FD-5 and FD-7 were the world’s first M1-type instruments, utilizing Konica Minolta’s original VFS (Virtual Fluorescence Standard) to provide measurements corresponding to D50. Konica Minolta’s VFS makes the FDs the only instruments that can measure FWAs for any chosen illuminant, including self-measured illuminants.

With spectrophotometers, white calibration is performed as part of the daily work, and this calibrates the spectral reflectance coefficients (vertical axis). The new FD-7 and FD-5 are equipped with the industry’s first “Automatic Wavelength Compensation” function which automatically calibrate in the wavelength direction (horizontal axis) when white calibration is performed as part of daily work, greatly improving the reliability of measurement values.