Medical imaging – X-rays, nuclear medicine, scans and ultrasound printing

Printing medical imaging including nuclear medicine, CT/MRI scans, ultrasounds and x-rays cost effectively on standard media formats in vibrant, HD colour and in sizes up to A3+, the C910 DM is suitable for use in dental and veterinary practices, hospital and clinics.

  • Up to 5 simultaneous imaging equipment connections
  • Recommended usage – Nuclear medicine, ultrasound, MRI/CT scans, x-rays
  • No additional external hardware or software required

Digital LED technology – High-quality non-diagnostic medical images

Combining the cost effectiveness and high-quality output of an LED printer, the high-performance C910 DM prints sharp, non-diagnostic images in HD mono and colour on a wide range of media.

  • High-quality non-diagnostic mono and colour printing of medical images
  • ProQ2400 Multi-level technology, 1200 x 600dpi resolution
  • Auto Colour Balance, Photo Enhance via Driver
  • Specific colour and mono rendering optimised for medical images
  • Handles media from A6 to A3+ and A3 wide 1200mm banners, from 64 to 300gsm

DICOM-embedded – Print directly from medical equipment

Printing directly from medical equipment, without the need for conversion software or external print servers, the cost of producing medical images in High Definition mono or colour with the fast, DICOM-embedded C910 DM is significantly lower compared with traditional DICOM printing technologies.

  • Fully-integrated DICOM print server
  • No additional external hardware or software required
  • Recommended DICOM printing usage up to 2,800 pages per month
  • Powerful 800MHz PowerPC 750 processor

Combined use – One device for office and medical printing requirements

  • Energy-efficient equipment, standard printer consumables
  • Fast A4 print speed of 31ppm colour, 36ppm mono, 16ppm/20ppm colour/mono in A3
  • Maximum paper capacity of 2,880 sheets of 80gsm


Printing Technology Digital 4 LED Full-color Electrophotographic Printing Method
Print Resolution 600 x 600 dpi (32 levels)
600 x 1200 dpi (2 levels)
600 x 600 dpi (2 levels)
Warm-up Time Approx. 85.0 seconds from power-on
First Print Out Time Color: Approx. 10.5 seconds
Mono: Approx. 9.0 seconds
Print Speed A4(Landscape) 31 ppm color, 36 ppm mono
A3 16 ppm color, 20 ppm mono
Interface 1000BASE-T/100BASE-TX/10BASE-T, USB 2.0 (High Speed)
Protocol TCP/IP, EtherTalk, TCP/IP
Printer Language Adobe PostScript 3, PCL 5c emulation, PCL 6 (XL) emulation, IBM ProPrinter emulation, Epson FX Emulation, PDF v1.6 emulation
Supported OS Windows 8.1 x64, Windows 8, Windows 8 x64, Windows Server 2008, Windows Server 2008 x64, Windows Server 2003, Windows Server 2003 x64, Mac OS X 10.6, Mac OS X 10.5, Mac OS X 10.4
Memory (Std./Max.) 1,024MB/1,024MB
Hard Disk Drive (Optional) 40 GB
Font Adobe PostScript 136 fonts, PCL emulation 87 scalable fonts, 4 bitmap fonts
Paper Size Tabloid extra (12″ x 18″), Tabloid (11″ x 17″), Legal 13, Legal 13.5, Legal 14, Letter, Executive, A3, A3+, SRA3, A4, A5, B4, B5, A6, Index Card (3″ x 5″) (75 x 125mm), Custom Size: Width 76-328 mm x Length 90-1200 mm
Paper Weight Tray 1 : 64 – 215 gsm
(Optional)Additional Tray : 64 – 215 gsm
Multi-purpose tray : 64 – 300 gsm
Input Capacity Tray 1 : 500 sheets
(Optional)Additional Tray : 500 sheets
Multi-purpose tray : 250 sheets
Output Capacity Face Down : Max. 500 sheets
Face Up : Max. 200 sheets
Dimensions(WxDxH) 655 x 623 x 471 mm
Weight(includes supplies) Approx. 81.5 kg
Weight(not includes supplies) Approx. 71.9 kg
Operating Environment Operating: 10 – 32 °C, 20 – 80 %RH
Storage: -10 – 43 °C, 10 – 90 %RH
No condensation
Power Source Single phase 220 – 240 VAC ±0%, 50/60 Hz ±1%
Power Consumption Operating: Max. 1,500W / Ave. 750W
Idle: 200W
Power Save: 33.0W
Safety & Environment Regulation EMC-Directive, CE Mark, GS Mark, CCC Mark
Noise Level Operating :Approx. 54 dBA
Idle: < 42 dBA
Power Save: < 28 dBA or Background level
In the Box Manuals, Starter toner cartridge x 4, Image Drum x 4, Power cable, DVD-ROM